The information will be refreshed every 1 second. When you see the following dialog in setup procedure, it means setup is completed. Then system will do fail-safe reboot by using Watchdog function. This connector supports the provided floppy drive ribbon cables. You will see the following window after you insert the CD The setup guide will auto detect your motherboard and operating system.

Uploader: Menris
Date Added: 18 June 2006
File Size: 70.48 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 29422
Price: Free* [*Free Regsitration Required]

Hard disk can be read and applications can be 945p-s7a but booting from hard disk 2. CPU Overheated If the system shutdown automatically after power on system for seconds, that means the CPU protection function has been activated. Loose parts will cause short circuits which may damage the equipment.

If the following message is shown after boot-up the system, it means the BIOS contents are corrupted.

It will disable the output on back panel audio connectors. This completes the installation.

Remove the power cord from power supply for seconds. In this panel, you can decide to increase CPU core voltage and Memory voltage or not. The setup guide will list the software available for your system, click on each software title to launch the installation program. Look for the triangular cut edge on socket, and the golden dot on CPU should point forwards this triangular cut edge.


Make sure both ends are securely plugged in; check the drive type in the standard CMOS setup.

Biostar 945P-A7A Owner’s Manual

Using even pressure on both ends of the DIMM, press down firmly until the module snaps into place. The vendor makes no representations or warranties with respect to the contents here and specially disclaims any implied warranties of merchantability or fitness for any purpose. Let user select a restoring way if system need to do a fail-safe reboot. When connecting with wires onto connectors, please note that the aufio wire is the positive and should be auido to pin 2, and the black wire is Ground and should be connected to GND.

Remove Pin Cap before installation, and make good preservation for future use. Call the drive manufacturers for compatibility with other drives.

Cannot boot system after installing second hard drive. Power on the AC. The IDE connectors can connect a master and a slave drive, so you can connect up to four hard disk drives. This connector supports the provided floppy drive ribbon cables.

You will need Acrobat Reader to open the manual file. Back up data and applications files. When the CPU is over heated, the motherboard will shutdown automatically to avoid a damage of the CPU, and the system may not power on again. Clear the CMOS data.


Biostar P-A7A – – motherboard – ATX – LGA Socket – iP Overview – CNET

The fan cable and connector may be different according to the fan manufacturer. Before you start installing the motherboard, please make sure you follow the instructions below: Click on each device driver to launch the installation program.

System does not boot from 945o-a7a disk 1. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

Reformat the hard drive. With the Overclock Manager, users can easily adjust the frequency they prefer or they 9445p-a7a get the best CPU performance with just one click.

Then system will do fail-safe reboot by using Watchdog function. After confirmed, please follow steps below to relief the CPU protection function. Hold the board on the edge, do not try to bend or flex the board.