It’s a community-based project which helps to repair anything. CPU fan is rotated normally. Remove Pin Cap before installation, and make good preservation for future use. System will update BIOS automatically and restart. The IDE connectors can connect a master and a slave drive, so you can connect up to four hard disk drives. Call the drive manufacturers for compatibility with other drives. Check cable running from disk to disk controller board.

Uploader: JoJorn
Date Added: 7 November 2009
File Size: 61.99 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 77213
Price: Free* [*Free Regsitration Required]

Using even pressure on both ends of the DIMM, press down firmly until the module snaps into place.

Biostar P-A7A Owner’s Manual |

Click on each device driver to launch the installation program. System will update BIOS automatically and restart. The setup guide will list the 954p-a7a driver for your motherboard and operating system. Before you start installing the motherboard, please make sure you follow the instructions below: If the testing fail, system will do a fail-safe rebooting.

Pop up the following dialog. Overclock Panel contains the these features: Back up data and applications files.

Biostar 945P-A7A – 8.0 – motherboard – ATX – LGA775 Socket – i945P

EXE under your optical drive. Loose parts will cause short circuits which may damage the equipment.


In this panel, you can decide to increase CPU core voltage and Memory voltage or not. The 9455p-a7a will be refreshed every 1 second.

Biostar P-A7A Owner’s Manual – Page 1 of 88 |

Make sure correct information is in setup. Fired it up, and everything worked the first time.

Hardware Monitor Panel Click the Hardware Monitor button in Main Panel, the button will be highlighted and the Hardware Monitor panel will slide out to left as the following figure. Look for the triangular cut edge on socket, and the golden dot on CPU should point forwards this triangular cut edge.

When the CPU is over heated, the motherboard will shutdown automatically to avoid a damage of the CPU, and the system may not power on again. Data transfer rates up to 3. If the signal has been triggered, it will record to the CMOS and show the message on next boot-up.

Keyboard lights are on, power indicator lights are lit, and hard drive is spinning. Plug in the power cord and boot up the system. The first hard drive should always be connected to IDE1. View our privacy policy. The IDE connectors can connect a master and a slave drive, so you can connect up to four hard disk drives.


Remove the power cord from power supply for seconds. I couldn’t be happier Then system will do fail-safe reboot by using Watchdog function.

Biostar 945P-A7A, LGA775 Socket, Intel (945P-A7A(8.0)) Motherboard

With the Overclock Manager, users can easily adjust the frequency they prefer or they can get the best CPU performance with just one click. Table of Contents Chapter 1: We do biostzr best to update store pricing and inventory amounts as they change. CPU fan is rotated normally. TigerDirect Business is not responsible for typographical or photographic errors.

Coupons are subject to change 945-a7a notice. One coupon redeemable per item per customer. There is no guarantee that interference will not occur in a particular installation.